Carbon Paste Composite with Co3O4 as a New Electrochemical Sensor for the Detection of Allura Red by Reduction

The detection of Allura red (AR) by electrochemical reduction using a different electrode from the conventional mercury electrode is presented. A carbon paste with cobalt (II, III) oxide composite electrode (CoO_x/CPE) is reported for the first time for the detection of AR. Moreover, others dyes such as tartrazine (TZ), sunset yellow (SY), amaranth (AM), Ponceaut 4‐R (P‐4R), and Sudan (SD) as well as pharmaceutical agents such as paracetamol (PMC) that are present in samples that contained AR did not show a reduced signal between 0.0 and ?0.3 V, which is the potential range where AR reduction was observed. The surface electroactivity was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). The presence of CoO_X increased the cathodic peak current for AR by more than 50 % and 65 % via CV and square wave voltammetry (SWV), respectively, compared with an unmodified carbon paste electrode. Under the optimal parameters, (pH=3.0, accumulation time (t_ACC)=60 s and accumulation potential (E_ACC)=0.50 V), the detection limit for AR was 0.05 μmol L^?1. The new sensor was sensitive and stable for the detection of AR. Moreover, it was easily manufactured and very convenient for food samples such as soft and isotonic drinks as well as chili sauce.     

Properties of G-martingales with finite variation and the application to G-Sobolev spaces

As is known, if $B={\left(B_t\right)}_{t\in [0,T]}$ is a $G$-Brownian motion, a process of form ${\int }_0^t{\eta }_{s}d{〈B〉}_s?{\int }_0^{t}2G\left({\eta }_s\right)ds$, $\eta \in M_G^1(0,T)$, is a non-increasing $G$-martingale. In this paper, we shall show that a non-increasing $G$-martingale cannot be form of ${\int }_0^t{\eta }_{s}ds$ or ${\int }_0^t{\gamma }_{s}d{〈B〉}_s$, $\eta ,\gamma \in M_G^1(0,T)$, which implies that the decomposition for generalized $G$-Itô processes is unique: For arbitrary $\zeta \in H_G^1(0,T)$, $\eta \in M_G^1(0,T)$ and non-increasing $G$-martingales $K,L$, if ${\int }_0^t{\zeta }_{s}d{B}_s+{\int }_0^t{\eta }_{s}ds+K_t=L_t,t\in [0,T],$then we have $\eta \equiv 0$, $\zeta \equiv 0$ and$K_t=L_t$. As an application, we give a characterization to the $G$-Sobolev spaces introduced in Peng and Song (2015).     

柚皮素/β-环糊精超分子体系的包合行为

本文采用超声法制备了柚皮素（NAR）与β-环糊精（βCD）的包合物.粉末-X射线衍射（XRD）和红外吸收光谱（IR）测定均表明形成的包合物具有不同于主客体的新的结构性质.¹H NMR与ROESY核磁共振（NMR）实验表明NAR以苯环端从βCD的宽口端进入，并形成稳定的超分子包合物.量子化学计算分析NAR/βCD包合物的形成过程表明，驱动力源于焓驱动与氢键弱相互作用力；能隙和结合能分析得到的最优包合模式与NMR研究结果一致；ONIOM分层计算验证了上述结果.分子对接模拟出的最优包合模式也与量子化学计算、NMR的分析结果吻合.本文获取了清晰的NAR/βCD包合物构型及其形成机理，为该超分子药物的定量构效关系研究提供了理论参考.     

Experimental and theoretical investigation of CO2 and air bubble rising velocity through kerosene and distilled water in bubble column

This paper concerns with developing of parameters which influence terminal velocities of air and CO₂ bubbles in distilled water and kerosene pools. The objective of this study is to validate and correct the formulas that were developed by previous investigators for prediction of terminal velocities. The investigation revealed that the terminal velocity of a single rigid spherical bubble in Newtonian fluids can be developed by balancing of mechanical forces acting on the bubble. However, for large bubbles, because of deforming of the bubble which is a result of interfacial tension, the effect of surface tension should be considered in the terminal velocity prediction formula. By using PSO algorithm and plotting experimental data of terminal velocity against the size of gas bubbles, the suitable equation for each of systems was chosen. Results showed that Jamialahmadi model is more practical for terminal velocity prediction. Jamialahmadi model requires a modification to be utilized for air-kerosene, CO₂-kerosene, air- distilled water and CO₂-distilled water systems. The developed PSO algorithm model is accurate for prediction of experimental data with an average R² value of 0.9722.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Automorphism groups of designs with λ=1

If $G$ is a finite group and $k=q>2$ or $k=q+1$ for a prime power $q$ then, for infinitely many integers $v$, there is a 2-$(v,k,1)$-design $\mathbf{D}$ for which $\mathrm{Aut}\mathbf{D}?G$.     

Covalently Palladated Oligonucleotides Through Oxidative Addition of Pd0

An 11-mer oligonucleotide incorporating a central (2-iodobenzoylamino)methyl residue has been synthesized and palladated by oxidative addition of Pd₂(dba)₃. UV melting profiles of the duplexes formed by the palladated oligonucleotide with its natural complements were biphasic and the higher melting temperatures (T_m) exhibited considerable hysteresis. CD spectra, in turn, resembled those of canonical B-type double helices. Two-step denaturation, with the “low-T_m” melting involving only canonical base pairs and the “high-T_m” melting involving also dissociation of a Pd^II-mediated base pair, appears the most likely explanation for the observed UV melting profiles. As the latter step in all cases takes place at a higher temperature than denaturation of natural duplexes of the same length, the putative Pd^II-mediated base pairs are stabilizing.     

Molecular dynamics of the intramolecular 1, 3-dipolar ene reaction of a nitrile oxide and an alkene: non-statistical behavior of a reaction involving a diradical intermediate*

ABSTRACT

Potential energy surfaces and molecular dynamics of the intramolecular 1, 3-dipolar cycloaddition and ene reaction of a nitrile oxide with an alkene were performed in the gas phase and in dichloromethane with density functional theory. One hundred trajectories were propagated in the gas phase and in dichloromethane, respectively. Twenty percent of the trajectories in the gas phase involve bicyclic intermediate and the mean time gap is 472fs. A dynamically stepwise reaction is observed. In dichloromethane, more reactive trajectories were obtained and the time gap is larger than that in the gas phase.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Synthesis of phenanthroimidazole-based four coordinate organoboron compounds

The synthesis of N,C-coordinated organoboron compounds (B1-B4) based on phenanthroimidazole described. All the compounds were characterized by various spectroscopic techniques. Single crystal X-ray diffraction analysis of the compounds B1 and B3 revealed that the vicinity around the boron atom adopts tetrahedral geometry. Except compound B4, other organoboron compounds (B1-B3) does not show solvatochromism. All our newly synthesized organoboron compounds exhibited moderate to good solution state quantum yields (0.07–0.88) and moderate solid state quantum yields.